PRELIMINARY
miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
31
4.10
A
PPLICATION GUIDE
This section describes some examples of audio processing configurations that can be set up using the plugin.
They start from simple (no configuration required) through to more advanced.
4.10.1
Straight through
In this example, no configuration in the plugin is required. The only processing that takes place while playing
audio is in Dirac Live. All input channels proceed straight to the Dirac Live block, and all output channels are
taken from the Dirac Live outputs.
The next diagram illustrates the signal flow and processing in dark blue, overlaid on the signal flow diagram from
Figure 5. In this case, the signals flow directly from each input to the corresponding output, with processing only
being done in the Dirac Live signal processing blocks in the middle of the diagram. You can simply use the default
configuration in the plugin and proceed directly to Dirac Live calibration.
If you have not used Dirac Live before, we suggest that you perform a Dirac Live calibration
without configuring any additional processing with the plugin. Once you have learned how Dirac
Live calibration works, then attempt a more advanced configuration using the plugin.
