PRELIMINARY
miniDSP Ltd, Hong Kong /
www.minidsp.com
/ Features and specifications subject to change without prior notice
27
4.6
R
OUTING TAB
This tab mixes or routes the input channels and the Bass Mgt signal, and sends them to the Dirac Live processing
algorithm. The input channels are labeled along the left, and the output channels are labeled along the top.
There are 9 input channels and 8 output channels. Here is the default setting:
At each cross-point of the matrix, the input channel (labels along the left) is mixed into the corresponding
output channel (labels along the top) if the lettering is highlighted in yellow. The cross-point is turned on and off
by clicking on it. Any number of input channels can be mixed to each output channel.
Note: To rename an input channel, click on its label and type in a new name (maximum of eight characters).
At each cross-point, the gain of the mixed signal can be set to a value between -72 and +12 dB. To set the gain,
right-click on the cross-point to pop up the gain control. Set the gain by moving the slider, or alternatively, type
the value in directly into the entry box below,
press the Enter key
, then click the
close
button.
Each cross-point can also have the signal inverted by clicking on the
Invert
button. When the mixed signal is
inverted, the button will be displayed in green and its label will change to “Inverted”.
The lettering of the cross-
point will be highlighted in green.
