SMART IP ACCESS
29
Note!
If the mouse settings on the Target Server were ever changed, you must
synchronize mouse pointers manually, as explained below.
24.9.3 Manual mice synchronization
If the mouse settings on the Target Server were ever changed, or when the
Operating system on the Target Server is, Windows XP / 2003 Server / Vista,
Linux, Novell, SCO UNIX or SUN Solaris you must synchronize the mouse
pointers manually.
To manually synchronize mouse pointers:
1. From the Toolbar click
/
Manual Settings
. The
Mouse Settings
box
appears see Figure 24.
Figure 24 Mouse Settings box
2. Select the Target Server’s Operating System and click OK. Instructions and
sliders appear.
3. Follow the instructions and set any relevant sliders to the same values as set in
the Target Server’s Mouse Properties window.
2 examples!
For Windows XP, go to the Mouse settings on the Target Server and uncheck
Enhance pointer precision.
For Windows NT4. If Mouse Properties were ever changed for the Target Server –
even if they have been returned to their original state - uncheck default -
.
Click
OK
. The mouse pointers should be synchronized.
