MiniacRC
[ 41 ]
FINAL ASSEMBLY
Parts) wing, fuselage
Slide the wing into the fuselage as shown above.
The wing should pass in between the fuselage and the scoop. Gently rock the wing backward till
its trailing edge meets the side walls of the fuselage.
Check that the centerline of the wing and the seam inside the scoop align with each other.
Push the front of the wing up against curved belly of the fuselage. There is bound to be a slight
offset, as shown above on the right.
We will close this gap by sanding a curve into the inside surface of wing, similar to what was
done for the horizontal stabilizer.