Mini COUNTRYMAN PLUG-IN HYBRID, Руководство пользователя

Страница: 259 / 344

Overview
Imprint on the charging cable Charge current setting
"Max." "Reduced" "Low"
6 A 6 A 6 A 6 A
8 A 8 A 6 A 6 A
10 A 10 A 7.5 A 6 A
12 A 12 A 9 A 6 A
15 A 15 A 11.25 A 7.5 A
Depending on the charge current setting,
the charging duration changes.
Charging at an AC quick charging
station
The permitted charge current strength must
be determined prior to charging at an
AC quick charging station, for instance
from the call operator of the AC quick
charging station. The permitted charge cur-
rent strength can vary by country.
The charge current strength for charging at
an AC quick charging station, refer to
page 265 , can be adjusted in the vehicle at
two levels.
At delivery, the charge current for charging
at an AC quick charging station is set to
"Reduced". Maintain this setting unless it
was verified that a higher charge current
strength is permitted in the individual case.
The charge current changes depending on
the setting.
"Max." "Reduced"
32 A 16 A
The charge current can only be changed
when charging with a fast charging cable
(mode 3) with single-phase charging cur-
rent.
Maintaining the charge state
To conserve the electrical range for a later
time during the trip, SAVE BATTERY, refer
to page 115 , can be used to maintain or in-
crease the current state of charge of the
high-voltage battery.
Safety information
Warning
Improper working with electrical current
can lead to an electric shock due to high
voltages or high currents. There is a risk
of fire or danger to life. Observe the gen-
eral safety regulations when working with
electrical current.
Warning
A faulty and incorrectly designed charging
device at the charging location can cause
damage to the vehicle and overload the
power mains at the charging location.
There is a risk of fire and an injury hazard.
Seite 259
Charging the vehicle MOBILITY
259
Online Edition for Part no. 01405A54208 - II/22