MingTai SUN12-II, Руководство по эксплуатации

Страница: 8 / 17

6
the wrapped devices. The working temperature is 121 º C or 134 º C.
After having been selected, its indicator light is on.
6) COTTON button
It ’ s used to be the sterilization choice especially for the cotton yarn devices. The
working temperature is 121 º C.
After having been selected, its indicator light is on.
7) PLASTIC button
It ’ s used to be the sterilization choice especially for the plastic and the rubber
devices. The working temperature is 121 º C.
After having been selected, its indicator light is on.
8) button
It ’ s used to be the choice especially for the working temperature. There are two
working temperature for choice: 121 º C or 134 º C, whose light will on after being
selected.134 º C could not be selected for COTTON and PLASTIC system.
9) START/STOP button
Press down the Starting button for starting the sterilizing process;
After having been pressed down for 5 seconds of the button, it will stop the
sterilizing program.
10) Light indicator-Lack of water
It ’ s the light indicator for alarming the shortage of water in the distilled water tank
and reminding for filling distilled water.
11) Light indicator - waste water tank full
It ’ s the light indicator for alarming the full of the waste water tank, and reminding
for draining waste water.
12) READY light indicator
After closing the door, the READY lighting means can press START to working.
7.2 Fill & drain water
When you install the Steam Sterilizer for the first time, after turn on the switch,
then The machine would displaying lack of the source water. Then you need to
use the measuring cup to fill distilled water from the top inlet around 1500ml for
the first time, next time do not filling the water too full.
When the machine displaying the used water full, please drain waster water out
only after sterilizing in time.
Please clean the brass filter inside the chamber, or it would effect the pressure
releasing during the sterilization. Please clean the filter in the same time with you
draining the used water.
Note: Be sure to fill distilled water .
1. Before filling the distilled water, you must turn on the switch of the power!
2. Please fill the distilled water only after finish working!