MingTai SUN12-II, Руководство по эксплуатации

Страница: 11 / 17

9
Error code and resolving measures
NO Code
display
Alarm Tone Malfunction content Resolving Measures
1 E1 long "du"
Fault of temperature
sensor inside the chamber Inspect if anything effected the
sensor or wire not connecting well
or sensor was broken
2 E2 long "du" Pressure over 240 KPa Inspect pressure sensor or vacuum
pump working
3 E3 long "du" Fault of temperature sensor outside
the chamber Inspect the temperature sensor
outside of the chamber
4 E4 long "du" Super high inner temperature when
pressure rising Inspect inside temperature sensor
or pressure sensor
5 E5 long "du" Pressure releasing slowly Inspect the filter inside the chamber
keep it clean and no jam
6 E6 long "du" Problem of door switch or door
being opened when working Inspect door switch or if door
handle were revolved to the
right MAX position
7 E7 long "du" Fault of temperature senor on steam
generator Inspecting the temperature sensor
on steam generator
8 E8 long "du" Fail on pressure rising Inspect water flowing road and
steam leaking.
9
EH long "du" Steam generator not heating Inspect connecting wire or
resistance of steam generator
10 EF long "du" Pressure not over than 0 KPa Inspect water pump/steam generator
11 EL long "du" Pressure not over than 20 KPa Inspect if electric valve causing
steam leak, or replace water pump
12 Eo long "du" Pressure not over than 65 KPa Inspect if the water pump working
weakly. Or replace it
13 E9 long "du" Fail on keeping pressure and
temperature Inspect the steam leaking
14 EC long "du" The process interrupted artificially
Long press the start key, can unlock
alarm.
9. Maintenance and Service
Shut off the power before service or components’ replacement, and the
service or replacement work shall be done by the technician.
Working environment minimum brightness to 215 + 15 lx.