Minebea Intec Maxxis 4, Руководство по установке

Страница: 92 / 112

Error (ERR)
LED status Description Comments
Of No error No power
Constant green Exception error - Module has the status "EXCEPTI-
ON"
- The exception error monitoring
system closes all open connec-
tions to the module.
Flickering red CRC error
1 Hz lashing red - Error address
- Error baud rate
After possible changes:
- Invalid address
- No permissible baud rate
4.5.11 ProiNet I/O interface
The ProiNet I/O interface card has the type designation PR 1721/66 or PR 1721/76.
The ieldbus card is equipped with a standard RJ-45 socket (PR 1721/66) or two standard
RJ-45 sockets (PR 1721/76) for network connection.
It contains powerful UDP/IP connecting circuitry with transfer rates of 10 and 100 Mbit/s.
The card is inserted in the Option 1/FB slot, see Chapter
5.2.3 .
Technical data
Description Data
Internal connection
Pin strip, 50
‑
pin
External connection
One RJ
‑
45 socket (PR 1721/66) or two standard RJ
‑
45 sockets
(PR 1721/76) in the module cover
Transfer rate 10 Mbit/s and 100 Mbit/s
Auto-detection (10/100, HalfDX/FullDX)
Protocol ProiNet I/O
Connection mode Network
Coniguration XML ile
PR 1721/66
"GSDML-Vx.xx-Sartorius-PR5500-xxxxxx.xml"
PR 1721/76
"GSDML-Vx.xx-Minebea-PR5500-2-Port-xxxxxx.xml"
Potential isolation Yes
Cable type Twisted pairs, screened, e.g., patch cable CAT5 Autolink (stra-
ight or crossover)
Cable impedance
150
Ω
Cable length to HUB Max. 115 m
Dimensions (LxWxH) 55x50x22 mm
Process Controller Maxxis 4 PR 5500 4 Device installation
EN-90 Minebea Intec