5.2.3
Exchanging the plug-in cards
5.2.3.1
Safety instructions
WARNING
Working on the device while it is switched on may have life-threatening
consequences.
Before a plug-in card is inserted/removed, it is essential that
the device is shut down properly (menu [Operating]- [System maintenance]-
[Shutdown & Power of] ).
the device is disconnected from any power sources.
all LEDs have gone out.
5.2.3.2
Optional and ieldbus cards
1
Note:
If an optional card is to be replaced with a ieldbus card, the mounting plate (1) must be
rotated.
Plug all the connectors back in and switch the device back on.
Once the plug-in cards have been replaced, the device will detect them
automatically.
Process Controller Maxxis 4 PR 5500
5 Maintenance/repairs/soldering work/cleaning
EN-100
Minebea Intec