manualshive.com logo in svg

Minebea Intec EF-IN4P, Руководство по эксплуатации, Страница: 10 / 69

Поделиться
Скачать
Minebea Intec EF-IN4P Скачать руководство пользователя страница 10

3

Device installation

3.1

Mechanical preparation

3.1.1

Ambient conditions

-

Only use within buildings.

-

Operating temperature: -10°C to +40°C

-

Storage temperature: -20°C to +50°C

-

Relative humidity: 20% to 85%, non-condensing

-

Altitude: up to 3,575 m

3.1.2

Installation location

-

Place the device on a stable, flat surface.

-

Position the device so that the power plug is freely accessible and the power cord
does not present an obstacle or trip hazard.

Avoid unsuitable influences at the installation location:

-

Extreme temperatures and excessive temperature fluctuations

-

Heat due to proximity to heaters or due to direct sunlight

-

Aggressive chemical vapors

-

Extreme moisture

-

Extreme vibrations

3.1.3

Unpacking

3.1.4

Checking the equipment supplied

-

1 indicator

-

1 USB power supply with cable

-

1 indicator holder

-

Safety instructions and QR code for access to the complete documentation

3.1.5

Indicator holder

Align the holder using the threaded holes on the side of the indicator and install the
knobs. Set the indicator at the desired angle and tighten the knobs.

.

Unpack the device and check it for visible external damage.

If there is damage, follow the instructions in the chapter "Safety check".

.

Keep the original packaging in case the device needs to be returned. Remove all
cables before sending.

3 Device installation

Weight indicator Puro®

Minebea Intec

EN-7

Содержание EF-IN4P






































































Отзывы:

Нет отзывов