Minebea Intec CAS1, Руководство по эксплуатации, Страница: 69 / 160

— COM-1 Settings for the RS-232 interface
— DAT.PROT Data protocols
— SBI SBI protocol
— CONFIG. 5 - Coniguration (see chapter 6.3.2.1.1.1 )
— DAT.OUTP 6 - Data outputs (see chapter 6.3.2.1.1.2 )
— FORMAT 7 - Data outputs format (see chapter 6.3.2.1.1.3 )
— RESET 9 - Factory settings for COM1 (see
chapter 6.3.2.1.1.4 )
— COM-1 Settings for the RS-232 interface
— DAT.PROT Data protocols
— SBI SBI protocol
— CONFIG. 5 - Coniguration
— BAUD 5.1 - Baud rate
— 150 5.1.1 - 150
— 300 5.1.2 - 300
— 600 5.1.3 - 600
— 1200 5.1.4 - 1200*
— 2400 5.1.5 - 2400
— 4800 5.1.6 - 4800
— 9600 5.1.7 - 9600
— 19200 5.1.8 - 19200
— PARITY 5.2 - Parity
— SPACE 5.2.2 - Space
Only if 7 data bits is selected
— ODD 5.2.3 - Odd*
— EVEN 5.2.4 - Even
— NONE 5.2.5 - None
— STOPBIT 5.3 - Number of stop bits
— 1 Bit 5.3.1 - 1 stop bit*
— 2 BITS 5.3.2 - 2 stop bits
— HANDSHK 5.4 - Handshake mode
— SFTWARE 5.4.1 - Software handshake
— HRDWARE 5.4.3 - Hardware handshake, 1 character after
CTS*
— DATABIT 5.6 - Number of data bits
— 7 BITS 5.6.1 - 7 bits*
— 8 BITS 5.6.2 - 8 bits
6.3.2.1.1 SBI
SETUP
SBI
6.3.2.1.1.1 CONFIG.
SETUP
CONFIG.
* Factory setting
6 Menu structure Combics 1 Series Complete Scales Models CAW1P, CAW1S, CAS1
Minebea Intec EN-67