Minebea Intec CAS1, Руководство по эксплуатации, Страница: 65 / 160

1.9.6 - External linearization with standard
weights
1)
— LIN.E.USR
1.9.7 - External linearization with user weights
1)
— SET.VORL 1.9.8 - Set preload
— CLR.VORL 1.9.9 - Delete preload
— GESPRT. 1.9.10 - Key locked
— CAL.SEQ. 1.10 - Calibration/Adjustment sequence
— AUTOMAT 1.10.1 - Calibration with automatic adjustment
— MANUAL 1.10.2 - Calibration with manual adjustment*
— ZERORNG 1.11 - Zero range
— 1 PERC. 1.11.1 - 1 percent/max. load
— 2 PERC. 1.11.2 - 2 percent/max. load*
— 5 PERC. 1.11.3 - 5 percent/max. load
— INIT.ZER 1.12 - Zero at Power On
— 1 PERC. 1.12.1 - 1 percent/max. load*
— 2 PERC. 1.12.2 - 2 percent/max. load
— 5 PERC. 1.12.3 - 5 percent/max. load
— 10 PERC 1.12.4 - 10 percent/max. load*
— ON TARE 1.13 - Tare/zero at Power On
— ON 1.13.1 - On*
— OFF 1.13.2 - Of
— INIT.ZER 1.13.3 - Zero at Power On
— ISOCAL 1.15 - Calibration prompt
— OFF 1.15.1 - Of*
— ADJ.PROM 1.15.2 - On
— CAL.EXT. 1.16 - External calibration/adjustment
— ACTIVAT 1.16.1 - Activated*
— DEACT. 1.16.2 - Deactivated
— CAL.UNIT 1.17 - Weight unit for calibration
— GRAMS 1.17.1 - Grams
— KILOGR. 1.17.2 - Kilograms
— TONS 1.17.3 - Tons
— POUNDS 1.17.4 - Pounds*
— HND.EXT.G 1.18 - Manual entry of the external weight
— CAL.JUST 1.18.1 - Cal/adj weight
— LIN.GEW.1
1.18.2 - Linearization weight 1
1)
— LIN.GEW.2
1.18.3 - Linearization weight 2
1)
— LIN.GEW.3
1.18.4 - Linearization weight 3
1)
— LIN.GEW.4
1.18.5 - Linearization weight 4
1)
— JUS.OHN.G
1.19 - Calibration without weight
SM)
— NENNLST 1.19.1 - Maximum capacity
— AUFLOES
1.19.2 - Resolution
2)
— EMPFND.1 1.19.3 - Sensitivity 1
— EMPFND.2 1.19.4 - Sensitivity 2
— EMPFND.3 1.19.5 - Sensitivity 3
— EMPFND.4 1.19.6 - Sensitivity 4
— NUL.PNKT 1.19.7 - Zero point
— SPEICH. 1.19.8 - Save parameters
— GEOG.DAT
6 Menu structure Combics 1 Series Complete Scales Models CAW1P, CAW1S, CAS1
Minebea Intec EN-63