Mindray uMEC10, Руководство оператора

Страница: 78 / 288

7-6
„
Mode 2:
‹
Interval between high level alarm tones: 1 s.
‹
Interval between medium level alarm tones: 5 s.
‹
Interval between low level alarm tones: 20 s.
If you choose the ISO pattern, you can change the interval between alarm tones. To change
the interval between alarm tones:
1. Select [ Main Menu ][ Maintenance >> ][ User Maintenance >> ]enter the
required password.
2. Select [ Alarm Setup >> ] to enter the [ Alarm Setup ] menu.
3. Select [
High Alarm Interval (s)
], [
Med Alarm Interval (s)
] and [
Low Alarm
Interval (s) ] in turn and then select the appropriate settings.
WARNING
z
When the alarm sound is switched off, the patient monitor will give no audible
alarm tones even if a new alarm occurs. Therefore the user should be very careful
about whether to switch off the alarm sound or not.
z
Do not rely exclusively on the audible alarm system for patient monitoring.
Adjustment of alarm volume to a low level may result in a hazard to the patient.
Always keep the patient under close surveillance.
7.4.4 Changing the Alarm Tone Pattern
To change the alarm tone pattern:
1. Select [ Main Menu ][ Maintenance >> ][ User Maintenance >> ]enter the
required password.
2. Select [
Alarm Setup >>
] to enter the [
Alarm Setup
] menu.
3. Select [ Alarm Sound ] and toggle between [ ISO ], [ Mode 1 ]and [ Mode 2 ].
User or factory default configurations exert no impact on the setup of alarm tone pattern.
The alarm tone pattern remains unchanged after the monitor restarts.