Mindray uMEC10, Руководство оператора

Страница: 60 / 288

5-2
5.2 Entering the [Manage Configuration] Menu
1. Press the hardkey on the monitor’s front to enter the main menu.
2. Select [ Maintenance >> ][ Manage Configuration >> ]. Enter the required password
and then select [
Ok
].
5.3 Setting Default Configuration
The monitor will load the pre-set default configuration in the following cases.
„
The patient monitor restarts after quitting over 120 seconds.
„
A patient is admitted.
„
A patient is discharged.
„
Patient data is cleared.
„
Patient category is changed.
To set default configuration:
1. Select [
Select Default Config.
>>] in the [
Manage Configuration
] menu.
2. In the [ Select Default Config. ] menu, select [ Load the Latest Config. ] or [ Load
Specified Config.
].