Mindray uMEC10, Руководство оператора

Страница: 189 / 288

21-3
21.6 Setting Up Reports
21.6.1 Setting Up ECG Reports
You can print out ECG reports only under full-screen, half-screen or 12-lead monitoring
screen. To set up ECG reports, select [ Main Menu ]
ė
[ Print Setup >> ]
ė
[ ECG
Reports >> ].
„
[ Amplitude ]: set the amplitude of the ECG waveforms.
„
[
Sweep
]: set the wave print speed to 25 mm/s or 50 mm/s.
„
[ Auto Interval ]: If [ Auto Interval ] is set to [ On ], the system will automatically adjust
the space between waveforms to avoid overlapping.
„
[ 12-Lead Format ]: If you select [ 12
h
1 ], 12 waveforms will be printed on a paper from
top to bottom. If you select [ 6
h
2 ], 12 waveforms will be printed from left to right with
6 waveforms on each half part and a rhythm waveform will be printed at the bottommost.
If you select [ 3
h
4+1 ], 12 waveforms will be printed from left to right with 3
waveforms on each of the 4 columns and a rhythm waveform will be printed at the
bottommost.
21.6.2 Setting Up Tabular Trends Reports
To set up tabular trends reports, select [ Main Menu ]
ė
[ Print Setup >> ]
ė
[ Tabular Trends
Reports >>
].
„
Date: Select the desired date on which a tabular trends report is recorded for printing.
„
Start time: You can set a time period whose trend data will be printed out by setting
[ From ] and [ Back ]. For example, if you set [ From ] as 2007-4-2 10: 00: 00 and [ Back ]
as [
2 h
], the outputted data will be from 2007-4-2 08: 00: 00 to 2007-4-2 10: 00: 00. In
addition, the [ Back ] can be set to either:
‹
[
Auto
]: If [
Report Layout
] is set to [
Time Oriented
], the report will be printed by
time. If [ Report Layout ] is set to [ Parameter Oriented ], the report will be printed
by parameters.
‹
[ All ]: If you select [ All ], all trend data will be printed out. In this case, it is no need
to set [ From ].
„
[ Spacing ]: choose the resolution of the tabular trends printed on the report.
‹
[ NIBP ]: prints a tabular trends report when NIBP measurements were acquired.
Each NIBP measurement will generate a column in the tabular trends review
window. The values for the other measurements are added to the column to provide
a complete dataset for the NIBP measurement time.
‹
[ Auto ]: prints a tabular trends report during the period selected and at the interval
set in the [Interval] option. The [Interval] option is located at the bottom the
[Tabular Trends] tab of the [Review] window.