Mindray BeneFusion uVP, Инструкция по эксплуатации

Страница: 42 / 62

A - 2
NOTE
•
The equipment is not suitable for use in the presence of a flammable
anesthetic mixture with air or with oxygen or nitrous oxide.
•
When stored under temperature conditions beyond the defined operating
conditions, the equipment needs to be placed under room temperature at
least one hour before use.
•
The equipment may not meet the performance specifications if stored or
used outside the specified temperature and humidity ranges. If the
performance of the equipment is degraded due to aging or environmental
conditions, contact your service personnel.
Power Supply
AC Power Supply: 100 VAC to 240 VAC, 50/60 Hz, 0.30A to 0.13A
DC Power Supply: 10 VDC to 16 VDC, 2.0A to 1.3A
Battery run time
At least 5.5 hours for normal battery, at least 11 hours for smart
battery, and at least 21 hours for dual smart batteries
(operating at a rate of 5ml/h or 25ml/h, under standard
operating conditions*)
At least 1 hour for normal battery, and at least 2.5 hours for
smart battery and dual smart batteries (operating at a rate of
2000ml/h, under standard operating conditions*)
*Operating with a fully charged new battery at 20°C ± 2°C,
default screen brightness and volume, Wi-Fi disabled, without
accessories.
Battery charge time
≤
5 hours for normal battery,
≤
6 hours for smart battery, and
≤
12 hours for dual smart batteries (the pump is off, and
charged by the AC power supply).
Shutdown delay
Operating at a rate of 25ml/h, at least 30 minutes after first low
battery alarm
Main unit weight
≤
1.3 kg (with normal battery, without pole clamp)
Pole clamp
≤
0.15 kg
Main unit (W × H × D)
125mm x 95mm x 186mm (without pole clamp, the error is
±3mm)
Display
3.5 inches Color TFT LCD, resolution
≥
320x480 pixels
Speaker
Gives alarm tones (sound pressure 50 to 75 dB).
Supports multi-level tone modulation.
Alarm tones comply with IEC 60601-1-8