MIMAKI TS3-1600, Руководство по эксплуатации

Страница: 90 / 206

3-26
Setting media detection
Set the method for detecting a media when the media is set and the detecting type when the media is cut.
1
Press the key in the local mode.
2
Press the key.
3
Select the type (1-4) by pressing the keys
then press the key.
4
Select [MEDIA DETECT] by pressing the
keys.
5
Press the key.
6
Press the key.
• The setting display for the media detection is
displayed.
7
Select the set value by pressing the keys.
SELECT : Select either a roll media or leaf media by pressing the keys when the
media is detected.
WIDTH : The width of media is only detected without any key input when the media is
detected.(Detecting is started automatically by lowering the clamp lever.)
8
Press the key.
9
Select [CUTTING DETECT] by pressing the
key.
FUNCT I ON
SE TUP
< ENT >
SE TUP
SE L ECT
: T YPE . 1
[ 1 ]
MED I A DE T ECT < e n t >
[ 1 ] MED I A DE T ECT
DE T ECT ME THOD < e n t >
[ 1 ] MED I A DE T ECT
DE T ECT ME THOD : S E L ECT
[ 1 ] MED I A DE T ECT
DE T ECT ME THOD < e n t >
[ 1 ] MED I A DE T ECT
CUT T I NG DE T ECT < e n t >