MIMAKI TS3-1600, Руководство по эксплуатации

Страница: 40 / 206

2-8
Setting a roll media
Set a roll media to the roll media hanger located on the back of this machine.
1
Move the roll holder located in the back
of the device to the direction of the
middle of the device.
• Loosen the roll holder fixing screw and then move
it.
2
Check the clamp lever is lowered.
• Take care not to drop the media on a foot or so when the media is set. It may cause an injury
due to the media.
• The roll stopper arm works with the clamp lever. Do not push the clamp lever down while roll
stopper is caught between the roll stopper arm and this machine. The roll stopper arm might
be broken and roll stopper function
*1
might be disabled.
*1. The function that once pulled out a certain amount of media, media pullout is temporarily locked.
OK
NG
Roll stopper arm
Roll
holder
Device
side
Roll stopper
Roll stopper arm
Roll stopper
Roll
holder
Device
side
Lock screw
Roll holder