MIMAKI TS3-1600 Скачать руководство пользователя страница 16

Страница: 16 / 206

Safety Precautions

Cautions on Installation

Warning

Notes on maintenance

• It is strongly recommended to use the machine in a room that is not dusty. Set the Refresh level 2 or

3 when the machine is to be used in an unfavorable environment. (P.3-29 "Setting of Refreshing")

• Keep the front cover closed even when the machine is not printing. If not, dust can accumulate on

the nozzles in the heads.

• Dust in the heads can also cause drops of ink to fall suddenly down on the media during printing. In

such a case, be sure to clean up the heads. (P.3-22 "Setting Auto cleaning")

• When cleaning the ink-station or the heads, make sure to wear the attached gloves. Further, when

the solvent ink is used, it is necessary to wear the attached goggles.

• Perform wiping (removal of dust and paper powder) of the capping station and wiper frequently.

Periodic replacement parts

• Some parts of this machine must be replaced with a new one periodically by service personnel. Be

sure to make a contract with your distributor or dealer for After sale service to ensure a long life of
your machine.

CAUTION

A place exposed to direct
sunlight

On an inclined surface

A place where temperature or
humidity varies significantly

• Use the machine under

the following
environmental
conditions:

• Operating environment:

20 to 35 °C
(68 to 95 °F)
35 to 65 % (Rh)

A place that vibrates

A place exposed to direct air
flow from an air conditioner or
the like.

Around a place where fire is
used

Содержание TS3-1600















































































































































































































Результаты поиска

Содержание TS3-1600

Отзывы:

Бренды по названию

Популярные бренды

MIMAKI TS3-1600, Руководство по эксплуатации

Результаты поиска

Содержание TS3-1600

Отзывы:

Бренды по названию

Популярные бренды