MIMAKI TS3-1600, Руководство по эксплуатации

Страница: 137 / 206

4-19
When Nozzle clogged after cleaning
4
Routi
n
e Ma
int
ena
nc
e
DISCHARGE & WASH
Discharge ink from the heads, dampers and ink tubes, and then wash them.
1
Select [HD.MAINTENANCE] of the maintenance menu.
(1) Press the key in the local mode.
(2) Select [MAINTENANCE] by pressing the keys then press the key.
(3) Select [HD.MAINTENANCE] by pressing the keys.
(4) Press the key.
2
Select [DISCHARGE&WASH] by pressing
the
keys.
3
Press the key.
4
Remove the ink cartridge.
• The ink left in the head or tube is discharged to the
waste ink tank.
• The display on the right is displayed after discharging.
5
Set the cleaning solution cartridge to the
ink station.
• Absorbing of the cleaning solution is started.
• The display on the right is displayed after absorbing.
• To use this function, the dedicated cleaning solution ( P.4-2 “Notes on cleaning solution”) is
required. In addition, before performing the work, check whether ink to be filled again remains
or not.
• When the following messages are indicated, check the waste ink tank, and then operate it,
referring to P.4-39 "If Waste ink tank confirming message is displayed" according to the
situation.
C o n f i r m a w a s t e t a n k
C o n t i n u e <
> E x c h a n g e
C o n f i r m a w a s t e t a n k
E x c h a n g e
: e n t
HD . MA I NT ENANCE
D I SCHARGE&WASH < e n t >
R emo v e : I n k C a r t r i d g e s
MMCC YYKK
* D I SCHARGE *
0 0 : 0 0
S e t : Wa s h i n g C a r t r i d g e
1 2 3 4 5 6 7 8
* ABSOPRP T I ON *
0 0 : 0 0
R emo v e : C a r t r i d g e s
1 2 3 4 5 6 7 8