MIMAKI TS3-1600, Руководство по эксплуатации

Страница: 132 / 206

4-14
When not using for a long term (CUSTODY WASH)
When the operation of the machine is to be suspended for a week or more, use the [CUSTODY WASH]
function to clean the nozzles in the heads and the ink discharge passage.
After the cleaning, store the machine properly.
1
Press the key in the local mode.
2
Select [CUSTODY WASH] by pressing the
keys.
3
Press the key.
• The carriage moves onto the platen.
4
Clean the wiper and the bracket.
(1) Open the front cover then pull out it by holding projections at both ends of the wiper.
(2) Clean it with a clean stick dipped in the cleaning solution.
( For sublimation dye ink : SPC-0137, For solvent ink : SPC-0369)
(3) Insert it in the original position by holding the projections at both ends of the wiper.
Check the
followings in
advance.
Is [NEAR END] or [NEAR END] displayed ?
• The cleaning solution or ink is absorbed in washing.
At this time, washing is unable to operate if the ink end or near-end is
detected.
• Replace it with a cartridge undetected for the ink end or the like.
• When the following messages are indicated, check the waste ink tank, and then operate it,
referring to P.4-39 "If Waste ink tank confirming message is displayed" according to the
situation.
C o n f i r m a w a s t e t a n k
C o n t i n u e <
> E x c h a n g e
C o n f i r m a w a s t e t a n k
E x c h a n g e
: e n t
S T . MA I NT ENANCE
CARR I AGE OUT
< e n t >
S T . MA I NT ENANCE
CUS TODY WASH
< e n t >
WI PER C L EAN I NG
COMP L E T ED ( NEX T )
: e n t
Projection