MIMAKI SIJ-320UV страница 6 Скачать руководство пользователя | Manualshive

Страница: 6 / 124

background image

CAUTION

v

CAUTION

DISCLAIMER OF WARRANTY

THIS LIMITED WARRANTY OF MIMAKI SHALL BE THE
SOLE  AND  EXCLUSIVE  WARRANTY  AND  IS  IN  LIEU
OF  ALL  OTHER  WARRANTIES,  EXPRESS  OR
IMPLIED,  INCLUDING,  BUT  NOT  LIMITED  TO,  ANY
IMPLIED  WARRANTY  OF  MERCHANTABILITY  OR
FITNESS,  AND  MIMAKI  NEITHER  ASSUMES  NOR
AUTHORIZES  DEALER  TO  ASSUME  FOR  IT  ANY
OTHER  OBLIGATION  OR  LIABILITY  OR  MAKE  ANY
OTHER  WARRANTY  OR  MAKE  ANY  OTHER
WARRANTY  IN  CONNECTION  WITH  ANY  PRODUCT
WITHOUT MIMAKI’S PRIOR WRITTEN CONSENT.
IN  NO  EVENT  SHALL  MIMAKI  BE  LIABLE  FOR
SPECIAL,

INCIDENTAL

OR

CONSEQUENTIAL

DAMAGES OR FOR LOSS OF PROFITS OF DEALER
OR CUSTOMERS OF ANY PRODUCT.

Requests

• This Operation manual has been carefully prepared for

your easy understanding.
However, please do not hesitate to contact a distributor
in your district or our office if you have any inquiry.

• Description contained in this Operation manual are

subject to change without notice for improvement.

Interference to televisions and radios

The  product  described  in  this  manual  generates  high
frequency when operating.
The product can interfere with radios and televisions if set
up or commissioned under improper conditions.
The  product  is  not  guaranteed  against  any  damage  to
specific-purpose radio and televisions.
The product’s interference with your radio or television will
be  checked  by  turning  on/off  the  power  button  of  the
product.
In the event that the product is the cause of interference,
try to eliminate it by taking one of the following corrective
measures or taking some of them in combination.

• Change the orientation of the antenna of the television

set or radio to find a position without reception difficulty.

• Separate the television set or radio from this product.
• Plug the power cord of this product into an outlet which

is isolated from power circuits connected to the
television set or radio.

Foreword

Congratulations on your purchase of MIMAKI color ink jet
printer "SIJ-320UV" .
“SIJ-320UV” is a color inkjet printer that can print with UV
ink realizing high speed and high image quality.

About usable ink

Usable ink for this machine is Lus120 ink (four-color
model).

• 4-colors version:2 each of Cyan, Magenta, Yellow and

Black color ink bottle are use.

On This Operation manual

• This Operation manual is describing the operations

and maintenance of "Color inkjet printer SIJ

Series

"

(called as this machine hereafter)

• Read this Operation manual carefully and understand

them thoroughly to use.

• It is also necessary to keep this Operation manual on

hand.

• This Operation manual has been carefully prepared for

your easy understanding, however, please do not
hesitate to contact a distributor in your district or our
office if you have any inquiry.

• Descriptions contained in this Operation manual are

subject to change without any notice for improvement.

• You can also download the latest manual from our

website.

Reproduction of this manual is strictly prohibited.
All Rights Reserved.Copyright
© 2015 MIMAKI ENGINEERING Co., Ltd.

«
...
4
5
6
7
8
...
»

Содержание SIJ-320UV





























































































































Отзывы:

Нет отзывов

Похожие инструкции для SIJ-320UV

Бренд: BIXOLON Страницы: 29

Бренд: Oki Страницы: 18

8860MFPD - Multifunction Inkjet Printer

Бренд: Xerox Страницы: 16

Бренд: Oki Страницы: 2

Бренд: Ricoh Страницы: 120

Бренд: HCC Technology Страницы: 71

C11CA19201 - WorkForce 30 Color Inkjet Printer

Бренд: Epson Страницы: 36

C11CA19201 - WorkForce 30 Color Inkjet Printer

Бренд: Epson Страницы: 3

C11C694201 - PictureMate Dash PM 260 Color Inkjet Printer

Бренд: Epson Страницы: 72

C11C638001 - LQ 300+II B/W Dot-matrix Printer

Бренд: Epson Страницы: 120

C11C640001 - LX 300+II B/W Dot-matrix Printer

Бренд: Epson Страницы: 129

C11CA54203 - PictureMate Show Digital Frame

Бренд: Epson Страницы: 106

C11CA19201 - WorkForce 30 Color Inkjet Printer

Бренд: Epson Страницы: 2

Бренд: Plockmatic Страницы: 76

Бренд: Renkforce Страницы: 12

Бренд: 3DGence Страницы: 103

Бренд: Kyocera Страницы: 44

9500 - HL 1660EN B/W Laser Printer

Бренд: Brother Страницы: 258

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды