MIMAKI ME-300STII, Руководство по эксплуатации

Страница: 35 / 90

Operation Modes
2-11
Remote mode
The machine waits for data from the host or engraves works in this mode.
Press in the local mode to change to the remote mode.
*1
*1. If a G-code is set using an operation switch command, when the cutting operation for the received data
is completed, the machine automatically returns to the local mode.
No
.
LCD Description
1 [Remote] Indicates that the machine is in the remote mode.
2 1KB Indicates the amount of non-plotted data in the receive buffer.
3 Com.IIC Indicates the current command.
4 Z-ES 0.5 Indicates cutting speed of Z axis. [mm/s]
5 XYES 0.5 Indicates cutting speed of X/Y axis. [mm/s]
6 ZC 2.00 Indicates the lifting amount of the cutter in terms of Z axis. [mm]
*2
*2. If a G-code is set using an operation switch command, the cutting depth and lifting amount are dis-
abled and *** is displayed for each of them.
7 ZD 1.00 Indicates the cutting depth of the cutter in terms of Z axis. [mm]
*2
8 Spin.ON Indicates that the spindle motor is on.
[ R e m o t e ] 1 K B
S p i n . O N C o m . II C
Z D : 1 . 0 0 Z - E S : 0 . 5
Z C : 2 . 0 0 X Y E S : 0 . 5
(1)
(8)
(2)
(6)
(7)
(3)
(5)
(4)