manualshive.com logo in svg

MIMAKI JFX-1631/1615 Plus, Руководство по эксплуатации

Поделиться
Скачать
MIMAKI JFX-1631/1615 Plus Скачать руководство пользователя страница 28

Setting of ink cartridge

1-10

Precautions in handling ink cartridge

Precautions in handling an unused slot

When there is an unused ink slot for the ink set, fill cleaning solution (SPC-0606FS) into the head, and execute
maintenance regularly.
If maintenance with cleaning solution is not executed, the head may not discharge ink well.

1

Execute Subtank Maintenance once a day.

• Execute maintenance referring to P.4-15 “Subtank Maintenance”.
• An unused head indicates “N”. Select the head displaying “N” with 

 keys, and execute maintenance.

• Use the recommended ink cartridge by Mimaki.
• Do not touch the ink directly. If the ink settles on the skin or clothes, immediately wash it off with soap

and water. If you get ink in your eyes, immediately wash your eyes with a lot of clean water. Then,
consult a doctor as soon as possible.

• Store ink cartridge in a dark and cold place.
• If the ink cartridge is moved from a cold place to a warm place, leave it in the room temperature for

more than three hours before using it.

• Be sure to thoroughly consume the ink in the ink cartridge, once it is opened, within six months. If an

extended period of time has passed after opening the cartridge, drawing quality would be poor.

• Store ink cartridges in a place that is out of the reach of children.
• When discarding unused ink cartridges, entrust them to an industrial waste disposal contractor,

clarifying their contents.

• Some component (photoinitiator) of the ink is toxic against aquatic organisms. Avoid leakage of it to

natural water system or domestic waste water.

• Do not use ink cartridges expired the date noted on them.
• Before using an ink cartridge, be sure to read the Material Safety Data Sheet (MSDS).
• Do not shake the ink cartridge violently. Shaking or turning it toughly can cause leakage of ink.
• Never disassemble the ink cartridge.
• Never refill the ink cartridge with ink. Refilling the ink cartridge can cause a trouble. Remember that

Mimaki assumes no responsibility for any damage caused by the use of the ink cartridge replenished
with ink.

• When turning the power on, a message to promote subtank 

maintenance may be displayed. Press the 

 key and then 

execute subtank maintenance.

• This message is displayed when turning the power on again after 

two days or more since the  message has been displayed once.

F I L L UP I NK

HEAD

[ MMCCYYKKWW

N

NNNNN ]

B l a n k h e a d ma i n t e

OK : < e n t >

ENTER

Содержание JFX-1631/1615 Plus



























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды