MIMAKI CG-FX SERIES, Руководство по эксплуатации

Страница: 70 / 142

– 3.18 –
Setting Procedure
1) Set a plotter to local mode
2) Enter the jog mode by pushing on the jog keys
[ ], [ ], [ ] and [ ].
3) Lighten the Light Pointer by pushing on the
[REMOTE] key.
4) Shift the Light Pointer to the registration mark
detection position by pushing on the jog keys
[ ], [ ], [ ] and [ ].
5) Return to the local mode after completing the
jog mode with the [END] key.
6) Push on the [FUNCTION] key.
7) Select [MARK sensor] by pushing on the jog
keys [ ] [ ].
8) Push on the [ENTER/HOLD] key.
9) Push [ENTER/HOLD] key after confirming
[SENSOR CHK] is displayed.
10) Set the each configurations, paper hold ON/
OFF, length of the registration mark, shape of
the registration mark, and speed of the regis-
tration mark detection.
For details on setting the [PAPER HOLD], [SIZE], [FORM],
refer to the [MARK DETECT] setting procedure. (Refer to
Page 3.26)
The setting value of the [SPEED] is set to 10cm/s to 30cm/s.
Change the value according to the test results.
CT1 020 050 0.30
SQUARE CUT <ENT>
MARK sensor <ENT>
PAPER HOLD :OFF
FORM : TYPE1
SPEED : 20cm/s
Mark detection position
TYPE1 TYPE2
PAPER HOLD :OFF
SIZE : 7mm
Make a margin
1mm, and more.
SENSOR CHK <ent>
FUNCTION