MIMAKI 3042 MkII EX, Руководство по эксплуатации

Страница: 82 / 126

Chapter 4 Maintenance
4-6
Maintaining the Capping
Station
Maintain the ink cap, wiper, etc. located in the capping
station. (SATION MAINT.)
The ink cap and wiper function as follows.
•
Wiper
: It wipes off ink sticking to the head nozzles.
•
Ink cap
: It prevents the head nozzles from clogging due
to dryness.
As the machine is used repeatedly, the wiper and ink cap
gradually become dirty with ink, dust, etc.
If nozzle missing cannot be corrected even after head
cleaning (
P.2-8) has been performed, use a F-200 /
LF-200 Maintenance liquid kit and cleaning swab.
Cleaning the Wiper and Cap
It is recommended that the wiper and cap be cleaned
frequently in order to maintain the high image quality of
the machine and keep the machine itself in good working
order.
1
Press the
(MENU)
in LOCAL mode.
2
Press to select “MAINTENANCE”,
and press the key.
• MAINTENANCE MENU will be displayed.
3
Press the key.
• “STATION” will be selected.
4
Press the key.
• “CARRIGE OUT” will be selected and the carriage
will move.
5
Open the right maintenance cover.
• Perform Steps 6 to 8 when using the rubber wiper.
6
(When using rubber wiper) Pull out the wiper.
• Pull out the wiper by holding the protrusions at its
both ends.
7
(When using rubber wiper) Clean the wiper
and bracket.
• Wipe off the ink sticking to the wiper and bracket with a
cleaning swab dipped in cleaning solution for
maintenance.Wipe off so that cleaning solution for
maintenance will not remain.
8
(When using rubber wiper) Reattach the
wiper at its original position.
• Insert the wiper by holding the protrusions at its
both ends.
• Perform Step 9 when using the suction wiper.
• To keep the nozzle status normal, perform wiper
cleaning frequently.
Tools required for Maintenance
• F-200 / LF-200 Maintenance liquid
• UJ Cleaning swab • Polydropper
(161-22-25-02)
• Gloves • Safety glasses
• Be sure to wear the included safety glasses and
gloves when maintaining the capping
station.Otherwise, you may get ink in your eyes.
• Do not move the carriage out of the capping
station by hand.When it is desirable to move the
carriage, press the [FUNK1] key to execute the
carriage-out. (
P.4-6Steps 1 to 2)
• Even if you cleaned the wiper, when Nozzle out or
Ink dropping cannot be solved, try to replace the
wiper.
• If the wiper is extremely dirty or has a scratch or
damage on it, replace the wiper. ( P.4-19 )
Protrusion
Wiper
Bracket
Protrusion