3-15
Chapter 3 Setup
3
2
2
2
Setting of LT mode
1
Press the
(MENU) key in the local
mode.
2
Press
to select "Setting", then
press the
key.
• The setting menu is displayed.
3
Press the
(>>)
.
4
Press
to select “LT mode” , and
press the
key.
5
Press
to select a set value, and
press the
key.
•
Set value
: ON / OFF
6
Press the
key several times to
end the setting.
Setting of SUCTION WIPER
Set the head that executes WIPING AFTER PRINT and
the execution interval.
1
Press the
(MENU) key in the local
mode.
2
Press
to select "Setting", then
press the
key.
• The setting menu is displayed.
3
Press the
(>>)
.
4
Press
to
select “SUCTION
WIPER” , and press the
key.
5
Press the
key.
• WIPING AFTER PRINT menu is displayed.
6
Press the
key.
• SELECT HEAD menu is displayed.
7
Press
to select the heads for
WIPING AFTER PRINT, then press
(
)
.
• Only heads with check boxes selected will be
suction-wiped after printing.
• Head 4 (Head 3 with 3042MkII) is always
selected.
8
Press the
key.
9
Press
to select “EXEC
INTERVAL” , and press the
key.
10
Press the
key.
• EXEC INTERVAL setting menu is displayed.
11
Press
to select the set value, and
press the
key.
• Set value: FILE/WORK CHANGE
• When set value is set to "FILE", proceed to Step
12. Otherwise, proceed to Step 14.
12
Press
to select “Interval” , and
press the
key.
13
Press
to change interval , and
press the
key.
• Set value: 1 to 5
14
Press the
key several times to
end the setting.
Setting of Scan Speed
1
Press the
(MENU) key in the local
mode.
2
Press
to select "Setting", then
press the
key.
• The setting menu is displayed.
3
Press the
(>>)
.
4
Press
to select “Scan Speed” ,
and press the
key.
5
Press
to select a set value, and
press the
key.
•
Set value
: STANDARD / LOW
6
Press the
key several times to
end the setting.
• Since UV light intensity adjustment is performed,
check the print performance (stickiness, odor etc.)
before using the LT mode.
• Effective condition
Ink type
Resolution
Pass
Media
LUS120
600 x 600
8 pass
UV PET
• When the set value is set to "FILE", wiping after
print will only be performed at set intervals.
• When the set value is set to "WORK CHANGE",
wiping after print will only be performed at the time
of work change.
Содержание 3042 MkII EX
