![background image](http://html1.mh-extra.com/html/milwaukee/mi-180/mi-180_instruction-manual_1798886033.webp)
www.milwaukee
inst.com
33
SETUP
Setup mode allows viewing and modifying the following parameters:
• Calibration Alarm Time-Out (pH range only)
• Buffer Display (pH range only)
• Cell Constant (EC range only)
• TDS Factor (EC range only)
• Temperature Coefficient (EC range only)
• Reference Temperature (EC range only)
• Current Time (hh:mm)
• Current Date (MM.DD.YYYY)
• Beep Status
• Baud Rate (serial communication)
• Instrument ID
• Temperature Unit
To enter SETUP mode, press the SHIFT&MODE/SETUP keys while in normal measurement
mode.
Select the desired setup parameter using the UP and DOWN arrow keys.
Press the CAL key if you want to change the item value. The selected item (e.g. hour) will start
blinking.
Press the arrow keys to change the blinking value.