background image

7

LIMITED  WARRANTY         USA & CANADA

Every MILWAUKEE power tool* (see exceptions below) is warranted 

to the original purchaser only to be free from defects in material and 

workmanship. Subject to certain exceptions, MILWAUKEE will repair 

or replace any part on an electric power tool which, after examination, 

is determined by MILWAUKEE to be defective in material or workman-

ship for a period of five (5) years** after the date of purchase unless 

otherwise noted. Return of the power tool to a MILWAUKEE factory 

Service Center location or MILWAUKEE Authorized Service Station, 

freight prepaid and insured, is required. A copy of the proof of purchase 

should be included with the return product. This warranty does not 

apply to damage that MILWAUKEE determines to be from repairs 

made or attempted by anyone other than MILWAUKEE authorized 

personnel, misuse, alterations, abuse, normal wear and tear, lack of 

maintenance, or accidents.

Normal Wear: Many power tools need periodic parts replacement and 

service to achieve best performance. This warranty does not cover 

repair when normal use has exhausted the life of a part including, 

but not limited to, chucks, brushes, cords, saw shoes, blade clamps, 

o-rings, seals, bumpers, driver blades, pistons, strikers, lifters, and 

bumper cover washers.

*This warranty does not cover Air Nailers & Staplers; Airless Paint 

Sprayer; Cordless Battery Packs; Gasoline Driven Portable Power 

Generators;  Hand  Tools;  Hoist  –  Electric,  Lever  &  Hand  Chain; 

M12™ Heated Gear; Reconditioned Product; and Test & Measure

-

ment Products. There are separate and distinct warranties available 

for these products.

**The warranty period for Job Site Radios, M12™ Power Port, M18™ 

Power Source, Jobsite Fan and Trade Titan™ Industrial Work Carts 

is one (1) year from the date of purchase. The warranty period for 

the M18 FUEL™ 1" D-Handle High Torque Impact Wrenches, Drain 

Cleaning Cables, AIRSNAKE™ Drain Cleaning Air Gun Accessories, 

and REDLITHIUM™ USB Laser Levels is two (2) years from the date 

of purchase. The warranty period for the M18™ Compact Heat Gun, 8 

Gallon Dust Extractor, M18™ Framing Nailers, M18 FUEL™ 1/2" Ext. 

Anvil Controlled Torque Impact Wrench w/ ONE-KEY™, M18 FUEL™ 

1" High Torque Impact Wrench w/ ONE-KEY™, M18 FUEL™ 2 Gal. 

Compact Quiet Compressor, and M12™ Laser Levels is three (3) years 

from the date of purchase. The warranty period for the LED in the LED 

Work Light and the LED Upgrade Bulb for the Work Light is the lifetime 

of the product subject to the limitations above. If during normal use 

the LED or LED Bulb fails, the part will be replaced free of charge. 

Warranty Registration is not necessary to obtain the applicable war-

ranty on a MILWAUKEE power tool product. The manufacturing date 

of the product will be used to determine the warranty period if no proof 

of purchase is provided at the time warranty service is requested.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT 

REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CON-

TRACT FOR T

HE PURCHASE OF EVERY MILWAUKEE PRODUCT. 

IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT 

PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE 

LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR 

PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, 

EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CON

-

SEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN 

ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS 

FOR LOSS OF PROFITS. SOME STATES DO NOT ALLOW THE EX

-

CLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL 

DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT 

APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU 

OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL. 

TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS 

ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION 

ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS 

FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH 

DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WAR-

RANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE 

EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES 

DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WAR

-

RANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO 

YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, 

AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM 

STATE TO STATE.

This warranty applies to product sold in the U.S.A. and Canada only.

Please consult the ‘Service Center Search’ in the Parts & Service sec-

tion of MILWAUKEE’s website www.milwaukeetool.com or call 1.800.

SAWDUST (1.800.729.3878) to locate your nearest service facility for 

warranty and non-warranty service on a Milwaukee electric power tool.

RÈGLES DE SÉCURITÉ GÉNÉRALES 

RELATIVES AUX OUTILS ÉLECTRIQUES 

AVERTISSEMENT

Lire et veiller à bien com

-

prendre toutes les in-

structions. 

Le non-respect des instructions ci-des-

sous peut entraîner un choc électrique, un incendie 

et des blessures graves.

 Garder tous les avertisse-

ments et toutes les consignes à des effets de 

référence ultérieure.

• 

Conserver ces instructions - 

Ce manuel d’utilisation 

contient d’importantes instructions de sécurité et de 

fonctionnement.

SÉCURITÉ DU LASER

AVERTISSEMENT

Ce dispositif emet des 

faisceaux  laser  visibles, 

qui sont emis depuis l’outil. 

• Ce dispositif est conforme a la norme 21 cfr 

1040.10 et 1040.11, sauf la conformite a la norme 

iec 60825-1 ed. 3., tel que decrit dans la notice 

du laser nº 56, du 8 mai 2019.

•Lampe laser - ne pas regarder directement dans 

le faisceau et ne pas voir dans le laser a l'aide 

d’instruments optiques. Ne pas diriger la lampe 

laser vers les autres

. La lumiere du laser peut 

causer des lesions oculaires.

SÉCURITÉ DU LIEU DE TRAVAIL

•Veuillez  s'assurer  qu’il  y  ait  les  protections 

correspondantes au lieu de travail (c'est-à-dire, 

surveiller le site lorsqu’on mesure les chemins, 

les chantiers de construction, etc.).

• 

Éviter les environnements dangereux. 

Ne pas 

exposer le dispositif à la pluie ou à la neige et ne 

pas l’utiliser dans un endroit humide ou mouillé. Ne 

pas utiliser le dispositif au milieu d’atmosphères 

explosives (où l’on trouve de fumées gazeuses, de 

la poussière ou bien, de matériaux inflammables). 

SECURITE PERSONNELLE

• Ne pas laisser personne n’ayant aucune idée de 

comment ce dispositif fonctionne s’approcher 

de l'outil, de ces instructions de sécurité et du 

manuel d’utilisation. 

Cet outil pourra représenter 

un danger si utilisé par d’utilisateurs débutants.

• Ne pas travailler hors de portée. Toujours se tenir 

bien campé et en équilibre. 

Une bonne stabilité 

procure un meilleur contrôle de l’outil en cas de 

situation imprévue.

UTILISATION  ET  ENTRETIEN            

DE LA BATTERIE

• Ne recharger qu’avec le chargeur spécifié par le 

fabricant. 

Un chargeur pouvant convenir à un type 

de bloc-piles peut entraîner un risque d’incendie 

lorsqu’il est utilisé avec un autre type de bloc-piles.

• N’utiliser l’outil électrique qu’avec une batterie 

recommandée. 

L’utilisation de tout autre bloc-piles 

peut créer un risque de blessures et d’incendie.

• Lorsque la batterie n’est pas utilisée, la tenir 

éloignée des objets en métal tels que les trom

-

bones, les pièces de monnaie, les clés, les clous, 

les vis ou d’autres petits objets métalliques qui 

pourraient connecter les bornes. 

Le court-circuitage 

des bornes d’une batterie peut entraîner des brûlures 

ou un incendie. 

Содержание M12 3632-20





















Отзывы: