23
Purging Air from the System
A
•
At this time you should have installed the SmartPak cartridge,
Barbed Fitting and the Tygon Tubing. Air trapped in the SmartPak
cartridge should now be purged from the system.
•
Verify that you have a full tank of RO water by viewing the Tank
Level display (A).
B
•
Press the Dispensing Button once to put the system into
DISPENSING mode (B).
C
•
Dispense the full tank of water from the system.
•
The system will go into FILLING TANK mode when the tank level is
below the 60% level (C).
•
When the tank level reaches the minimum level, the system will
finish dispensing water.
