Miller OM-246 022B, Руководство пользователя

Страница: 19 / 26

OM-246 022 Page 17
3-14.Enabling Wireless Operation In Big 40 C, Big Blue 400/500/Air Pak/Turbo
Ref. 803 835 / Ref. 803 834
! Stop engine. Disconnect
negative ( − ) battery cable.
Remove right side generator panel.
1
Electrical Box
Remove white cover from electrical
box.
2
Diagnostic Board PC9
PC9 is a small board (2x2) with 5
red LEDs, located in the upper left
corner. Unplug receptacle connect-
ing board.
Reinstall electrical box cover.
Reinstall right side generator panel.
1
Tools Needed:
2
3/8, 1/2 in.
SECTION 4 − TROUBLESHOOTING
Trouble Remedy
Remote completely inoperative. Green
receiver LED not on.
Make sure power source is on.
Make sure receiver is connected properly to welding power source (see Section 3-7).
Green receiver LED is on, but no or
limited control with remote.
Check and if necessary, replace batteries in remote hand or foot control.
Make sure components are properly programmed (see Section 3-12 and/or 3-13).