Miller Auto-Axcess E Digital, Руководство пользователя

Страница: 27 / 164

E675
Spec
OM-257 675 Page 21
SECTION 6 − SPECIFICATIONS FOR
AUTO-AXCESS E 675 DIGITAL
.
Appearance of actual unit may vary from unit shown in manual.
6-1. Serial Number And Rating Label Location
The serial number and rating information for this product is located on the front. Use rating label to determine input power requirements and/or rated
output. For future reference, write serial number in space provided on back cover of this manual.
6-2. Power Source Functionality
This power source is designed with the necessary functionality to integrate into a robot controller or PIC (Peripheral Interface Controller) that operate
using either DeviceNet or Ethernet communications.
6-3. Unit Specifications
Input
Power
Rated
Welding
Output
Voltage
Range
Wire Feed
Speed
Range**
Wire
Diameter
Range
Max
Open
Circuit
Voltage
DC
Amperes Input At Rated Load Output 60 Hz,
Three-Phase
Input
KVA
Input
KW
IP
Rating
230 V 400V 460 V 575 V
Three
Phase
675 A @
44 V DC,
100%
Duty
Cycle
10-44 Standard:
50-1400
ipm
(1.3-35.6 mpm)
.035-.062 in.
(0.8-1.6 mm)
80 89
(0-1A*)
50
(0-1A*)
44
(0-1A*)
35
(0-1A*)
35.5
(0.8*)
34
(0.17*)
IP21S {
*While idling; Input amperage fluctuates while idling and is always less than one Ampere. Use one Ampere for power efficiency calculations.
**Wire feed speed ranges are for GMAW welding. While pulse welding, wire feed speed ranges may be more limited.
{ This equipment is designed for indoor use and is not intended to be used or stored outside.
6-4. Dimensions And Weight
Hole Layout Dimensions
A
B
C
E
D
21-3/4 in.
(553 mm)
42-3/4 in.
(1086 mm)
Ref. 250 158-B
17-3/32 in.
(434 mm)
A 17-3/32 in. (434 mm)
B 17-3/8 in. (441 mm)
C 19-3/32 in. (485 mm)
D 16-3/32 in. (409 mm)
E 1/2 in. (13 mm)
Weight
220 lb (100 kg) Net
237 lb (108 kg) Ship