Miller 907525, Руководство пользователя

Страница: 20 / 56

.
A complete Parts List is available at www.MillerWelds.com
OM-257220 Page 14
4-5. Dimensions and Weight
Hole Layout Dimensions
C D
A
G
14.5 in.
(368 mm)
26.8 in.
(681 mm)
17.2 in.
(437 mm)
B
Ref. 277774-A
F
E
A 8-11/16 in. (221 mm)
B 11-3/8 in. (289 mm)
C 15-3/4 in. (400 mm)
D 22-7/16 in. (570 mm)
E 2-3/4 in. (70 mm)
F 3-3/8 in. (86 mm) Dia.
G 1/4-20 UNC 2B Thread
Weight
122 lb (55.3 kg)
4-6. Environmental Specifications
A. IP Rating
IP Rating
IP23
This equipment is designed for outdoor use. It may be stored,
but is not intended to be used for welding outside during precipitation unless sheltered.
IP23 2014−06
B. Information On Electromagnetic Compatibility (EMC)
!
This Class A equipment is not intended for use in residential locations where the electrical power is provided by the public low−
voltage supply system. There can be potential difficulties in ensuring electromagnetic compatibility in those locations, due to con-
ducted as well as radiated disturbances.
This equipment complies with IEC61000-3-11 and IEC 61000−3−12 and can be connected to public low-voltage systems provided that the public
low-voltage system impedance Z
max
at the point of common coupling is less than 73.66 m
W
(or the short−circuit power S
sc
is greater than
2,172,158 VA). It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if
necessary, that the system impedance complies with the impedance restrictions.
ce-emc 1 2014-07
Notes