Miller Electric Spectrum Plus, Руководство пользователя

Страница: 20 / 44

OM-219 Page 16
3-3. Operation Mode Switch
Ref. ST-171 002 / Ref. ST-800 872-A / ST-801 326
1 Operation Mode Switch
Use switch to safely adjust gas/air
pressure without activating cutting
output.
2 Torch Mode (Standard)
Use these mode positions for stan-
dard cutter units.
3 Air Assist Mode (Optional)
Use these mode positions for cut-
ters equipped with optional air am-
plifier kit.
Place switch in applicable Gas Set
position to adjust gas/air pressure.
Only gas/air is activated when the
Power/Circuit Breaker switch is
turned On.
Place switch in the Cut position to
cut or gouge.
4 Air Filter/Regulator
5 Pressure Adjustment Knob
Lift knob and turn to adjust pres-
sure. Push knob down to lock in set-
ting.
2 3
1
V
POWER
ON ON
5
4
Set Switch To Begin Cutting
Set Switches
Requires
80-150 psi
(552-1034 kPa)
Supply
Set To
70 PSI (483 kPa)
For 25 ft (7.6 m)
Long Torch Cable Or
90 PSI (921 kPa)
For 50 ft (15.2 m)
Long Torch Cable
Adjust Pressure
Turn On Gas/Air Supply