Miller Electric MIGHT High Power TIG 150, Руководство пользователя

Страница: 9 / 24

SECTION 2 – DEFINITIONS
2-1. Warning Label Definitions
2-2. Symbols And Definitions
A. Warning! Watch Out! There are
possible hazards as shown by the
symbols.
1 Electric shock from welding electrode
or wiring can kill.
1.1 Wear dry insulating gloves. Do not
touch electrode with bare hand. Do not
wear wet or damaged gloves.
1.2 Protect yourself from electric shock by
insulating yourself from work and
ground.
1.3 Disconnect input plug or power before
working on machine.
2 Breathing welding fumes can be
hazardous to your health.
2.1 Keep your head out of the fumes.
2.2 Use forced ventilation or local exhaust
to remove the fumes.
2.3 Use ventilating fan to remove fumes.
3
Welding sparks can cause explosion or
fire.
3.1 Keep flammables away from welding.
Do not weld near flammables.
3.2 Welding sparks can cause fires. Have a
fire extinguisher nearby, and have a
watchperson ready to use it.
3.3 Do not weld on drums or any closed
containers.
4 Arc rays can burn eyes and injure skin.
4.1 Wear hat and safety glasses. Use ear
protection and button shirt collar. Use
welding helmet with correct shade of
filter. Wear complete body protection.
5 Become trained and read the instruc-
tions before working on the machine or
welding.
6 Do not remove or paint over (cover) the
label.
Volts
Output
Gas Input
Percent
Alternating
Current
Maximum Effective
Supply Current
Process
Off
Single Phase Static Frequency
Converter-Transformer-Rectifier
Amperes
Increase/Decrease
Of Quantity
Negative
High Temperature
Duty Cycle
Rated No Load
Voltage (Average)
Remote
TIG (GTAW)
Pulse
Look At The
Bottom For Rating
Information
Voltage Input
Positive
Direct Current
Primary Voltage
Rated Maximum
Supply Current
Lift-Arc Start
(GTAW)
HF Impulse
Starting (GTAW)
Suitable For Areas
Of Increased
Shock Hazard
Hertz
Line Connection
Conventional Load
Voltage
Rated Welding
Current
Gas Tungsten Arc
Welding (GTAW)
On
Shielded Metal Arc
Welding (SMAW)
OM-221 022 Page 5