Miller Electric MIGHT High Power TIG 150, Руководство пользователя

Страница: 14 / 24

4-2. Process Selection
4-3. Lift-Arc Start
Press Selector Switch Pad To Select Process
=Light Off =Light On =Light Flashing
1 – 2
Seconds
“Touch”
Pictorals show Lift-Arc start method – do not
use with TIG Impulse start.
Do NOT Strike Like A Match!
High Frequency Start Mode
This is the mode where the arc is started without the
Electrode touching the work piece. High frequency
electricity is released while the switch is depressed and
the high frequency will stop when the main arc starts.
High Frequency Pulse Mode
Pulses per second can be changed.
Lift Arc Pulse Mode
Pulses per second can be changed.
Lift Arc Mode
This is the mode where the arc is started by lifting the
electrode away from the work piece. High frequency
electricity is not used to start the arc.
See Section 4-3.
Hot Start Stick Welding Mode
OM-221 022 Page 10