Mikro DPM680, Инструкция по эксплуатации

Страница: 68 / 84

68
4
wEBpaGE opEraTions
(onlY for DpM680)
The webpages stored in the meter’s built-in
server can be accessed by a browser. However,
it is recommended to use IE7 or higher versions.
4.1
VolTaGE anD CurrEnT
paGE
The Voltage and current webpage can be
accessed either by typing the IP address in the
URL input of the web browser or by clicking on
the Voltage & current link in other webpages of
the meter. The main webpage as shown in Fig 82
should appear.
This main webpage displays the following
parameters:
noTE:
Please ensure the LAN is properly
connected to the meter and the TCP/IP
setting is properly configured both at the
meter and the client and/or router.
• line voltage: between any 2 phases.
• phase voltage: all phases.
• maximum/peak phase voltage: all phases.
• current: all phases and neutral.
• maximum/peak current: all phases & neutral.
• current THD: all phases.
• voltage THD: all phases.
• voltage sequence components: positive,
negative & zero.
• current sequence components: positive,
negative & zero.
• line frequency.
• time & date
3.8.4
for faCTorY usE onlY
The access to the for factory use only page is
restricted to factory personnel only.
3.8.4
W
ebpage Operations
4
4.1