Miha BODYTEC II, Руководство по эксплуатации

Страница: 82 / 114

Risk of damage to the device from not observing the oper-
ating temperatures!
– Before the workout, ensure that the device is at the pre-
scribed operating temperature Ä Table 4 “Device informa-
tion” on page 34.
– Observe the time needed to cool down or warm up the
device
Ä
Table 4 “Device information” on page 34.
9.2 Connecting the device
Personnel: n Trainer
1. Spread out a soft cloth on a level and firm base.
2. Set down the control unit upside down on the cloth.
3. Plug the connection cable into the control unit (Fig. 53/1).
4. Connect the power supply to the control unit (Fig. 53/2).
5.
When connecting the power cable (Fig. 53/2), make sure
that the safety plug connector is safely locked in place. To
disconnect, the detent mechanism must be released by
pulling back the plug grip.
Connect the power cable to the power supply.
ð
The control unit can be mounted on the column.
Observing the operating tempera-
tures
NOTICE
Connecting the control unit
Fig. 53: Connecting the control unit
Training with the device
2021-07-28 miha-bodytec II EMS training device 82