Miha BODYTEC II, Руководство по эксплуатации

Страница: 108 / 114

14 Ensuring optimum function
14.1 Maintaining the device
1 Control unit
2 Electrical lines and plug connectors
3 Grab handle
4 Support plate
5 Column
6 Base plate
The device must be serviced at regular intervals to ensure its func-
tion. The following service work must be performed at the specified
intervals:
When must the
device be serv-
iced?
What must be serviced? Who must
service the
device?
Before every
workout
Check the device for signs of damage:
n Control unit Fig. 62(/1)
n Electrical lines and plug connectors (Fig. 62/2)
n Support plate (Fig. 62/4)
n Grab handle (Fig. 62/3), column (Fig. 62/5), and base plate
(Fig. 62/6)
n i-body
®
(
Ä
“i-body
®
” on page 12 )
Replace damaged parts immediately with genuine replacement parts
of the manufacturer
Ä
“Customer service” on page 15 .
Do not use the device if there are signs of damage.
Check to make sure the mounting screws of the grab handle are tight
(
Ä
Chapter 10 “Adjusting the height of the grab handle” on page 84 ).
Trainer
After all workouts Check to make sure the mounting screws of the grab handle are tight
(
Ä
Chapter 10 “Adjusting the height of the grab handle” on page 84 ).
Trainer
Monthly Check to make sure the mounting screws between the base plate
(Fig. 62/6) and the column (Fig. 62/5) are tight.
Trainer
Every 24 months Check the electrical system Licensed elec-
trician
Fig. 62: Performing a visual inspection
Ensuring optimum function
2021-07-28 miha-bodytec II EMS training device 108