Miha BODYTEC II, Руководство по эксплуатации

Страница: 52 / 114

If favorites have been selected, only these favorite workouts will be
displayed in the card management menu.
The backup function is used to create a backup of the device set-
tings and programs as well as training plans on an external device
(USB flash drive). The “Restore” function can then be used to load
device settings and/or programs and training plans (depending on
your selection) to other devices.
Only use original USB flash drives supplied by the manufacturer on
the USB port.
With synchronized start, one device is assigned a managing func-
tion. This device controls the training procedure for all other
devices involved and is referred to as the master device. Devices
participating in the synchronized start that are not master devices
are referred to as managed devices.
The athlete/patient must strictly adhere to the instructions of the
trainer. If physical or device-specific problems arise during training,
notify the trainer immediately and follow the trainer’s instructions.
To ensure the trainer and persons training can communicate as
required, the managed devices must be oriented towards the
master device to allow the trainer to monitor each person training.
To ensure that training with synchronized start is effective and safe,
a maximum of 2 persons training per trainer is recommended.
The brand code (parameterization) is used for selecting or adding
default factory settings such as color settings, graphics settings,
and network functions. This option may only be used by miha
bodytec service employees or under their supervision.
Risk of injury from improperly entering brand codes!
– Never enter brand codes by yourself.
– If you want to use brand codes, contact Customer Service
( Ä “Customer service” on page 15).
If brand codes are entered without adequate background
knowledge, athletes/patients can be injured due to malfunc-
tions or incorrect parameterization and the device can be
damaged.
The system status can be used for identifying different device
parameters. It is an important source of information for our service
employees in the event of a defect. Provide service employees
with system status information if asked.
“Export log” is a function that allows relevant device information to
be exported to a USB flash drive in the event of an error.
The “Export log” function must be used only under the guidance of
miha bodytec service personnel.
Data backup/restoration
Master device/managed device
Brand code
L WARNING
System status
Export log
Understanding the device
2021-07-28 miha-bodytec II EMS training device 52