Miha BODYTEC II, Руководство по эксплуатации

Страница: 62 / 114

You can set the following parameters in the “Set up training plan
memory” menu:
n Name: Defines a custom name for the training program. Instruc-
tions on how to write names
Ä
Further information on page 58 .
n Program: Specifies the training program including pulse width,
rise time, etc., which will be stored for the training plan.
n Training time: Specifies the duration of the entire training plan.
n Repetitions: This screen shows the number of repetitions/exer-
cises after selecting the exercise.
n Exercises: Allows you to select the individual exercises.
“Pause” is an exercise.
n Remaining repetitions/time: Depending on the training time,
this shows the number of repetitions which can still be com-
pleted during the remaining time.
n Save training plan: The training plan cannot be saved as long
as the value of the remaining repetitions is not “0”.
– The screen will only show training programs with 4 second
cycles.
– While the athlete/patient is working out with the device, there
will be a remaining time that elapses with no exercising if the
training time cannot be divided by 8 seconds (4 second exer-
cise/4 seconds pause).
– If a training plan is deactivated, it is no longer visible in the
“Training plans” selection or in the favorites menu.
– After storing the training plan, you can change the exercises
and the name, but you cannot alter the program associated with
the training plan.
– If you select “Pause” as the exercise, the main controller is auto-
matically set to 30. You can only change this setting during or
after the pause if you press the main controller. The LED strip
turns orange while the intensity level is being reduced.
7.5 Setting up synchronized start
During training with synchronized start, several devices are net-
worked to form a training group. One device in the training group
provides the start command and enables simultaneous training
with several devices.
To ensure that the trainer and athletes/patients can communicate
as specified, the managed devices must be oriented towards the
master device so that the trainer can monitor each athlete/patient.
A maximum of 2 athletes/patients per trainer are recommended to
ensure that training with synchronized start is effective and safe.
2 steps are required to set up synchronized start:
n Setting up the master device
Ä
“Setting up the master device”
on page 63
n Setting up managed devices
Ä
“Setting up a managed device”
on page 63
Menu items of the training plan
memory
What is training with synchronized
start?
Steps to set up synchronized start
Customization and setup
2021-07-28 miha-bodytec II EMS training device 62