4
TS571W Installation Instructions
TS571W Installation Instructions
5
M
L
T
V
Q
K
U
●
Using a permanent marker, mark the center of
the mounting locations for the gate post bracket
subassembly.
●
Remove the operator arm from the gate post and
gate brackets.
●
Mark the center of the mounting locations for the
gate bracket.
●
Open the gate and reattach the operator to the gate
bracket.
●
Ensure that the operator arm is level and the
brackets are securely clamped.
●
Secure the post pivot bracket in place by installing
the hardware shown. Tighten both bolts (O and Q).
●
Remove the gate post and gate brackets.
●
Use a hammer and center punch to mark the center of
the mounting locations.
M
L
T
V
M
L
T
V
Step 6
Step 5
Step 7
Step 8
Step 9
PULL-TO-OPEN OPERATOR MOUNTING
PULL-TO-OPEN OPERATOR MOUNTING
●
Using a drill and 7/16” drill bit,
drill the necessary holes to
mount the gate post and gate
brackets.
Note: Some installations may
require additional reinforcement
be installed on the gate.
●
Secure the gate post bracket
subassembly with the supplied
hardware as shown.
Your Property
Your Property
