7
IMPORTANT SAFETY INSTRUCTIONS
These warning labels should be found at the locations specified below. If any of them are missing, immediately contact GTO
for replacements.
1.
KEEP CLEAR! Gate may move at any time.
2.
Do not allow children to operate gate or
play in gate area.
3.
This gate is for vehicles only. Pedestrians
must use a separate entrance.
Moving Gate Can Cause
Injury Or Death
WARNING
!
warning signs (4 enclosed) to be installed on both sides
of each gate leaf (3—5 feet above the bottom of the gate)
WARNING
!
MOVING GATE
Can Cause Injury or Death
1.
KEEP CLEAR! Gate may move at any time.
2.
Do not allow children to operate gate or play in gate area.
3.
This gate is for vehicles only. Pedestrians must use
separate entrance.
warning labels (4) installed on both sides
of each operator housing
RB2000
Maximum Gate: 500 lb. (226.7 kg); 16 ft. (4.8 m)
Voltage: 12 Vdc; Frequency: 0 Hz; Power: 41.4 W
Class I, II and III Vehicular Swing Gate Operator.
Serial Number: 1000-xxxxxxx
9901178
Conforms to UL 325 STANDARDS
TO MANUALLY OPEN AND CLOSE THE GATE:
1. Turn control box power switch OFF.
2. Disconnect front mount from gate bracket.
3. Pull front mount away from gate bracket.
Series
GTO, Inc. Tallahassee, Florida USA
Disconnect operator ONLY when the control box power
switch is OFF and the gate is NOT moving.
L I S T E D
US
C
product identification and manual operation instruction label (1)
installed on control box cover
