Miele PG 8536 Скачать руководство пользователя страница 59

Страница: 59 / 76

Mobile units, baskets and
inserts

Mobile units, baskets and inserts
should be checked daily to make sure
they are functioning correctly. The
washer-disinfector is supplied with a
check list.

The following need to be inspected:

– Check that the guide rails on mobile

units/inserts are free of hindrance
and that they are secured to the
mobile units/inserts correctly.

– Check that the mobile unit connector

is at the correct height and screwed
on correctly.

– Check that the locking caps in the

module connectors of modular
system mobile units are working
properly.

– Check that jets, sleeves and hose

adapters are securely held in
position in mobile units/inserts.

– Check that washing solution can flow

unhindered through all jets, sleeves
and hose adapters.

– Make sure caps and closures on

sleeves are correctly located.

and where applicable:

– Make sure that the spray arms rotate

freely.

– Make sure the spray arm jets are free

of any blockages. See "Cleaning the
spray arms".

– Check whether there are magnets on

the ends of the spray arms.

– Make sure no metal parts have been

attracted to the magnets on the ends
of the spray arms.

– Make sure that there are no small

metallic objects sticking to the
magnetic strip on a mobile unit.

– Check that the magnetic strip on

mobile units with automatic mobile
unit recognition is correctly screwed
into position.

In line with the periodic maintenance
of the washer-disinfector the mobile
units, modules and inserts should be
routinely serviced

every 1000

operating hours or annually

by a

Miele approved service technician.
See ""Maintenance / Periodic
checks".

Maintenance

Содержание PG 8536













































































Результаты поиска

Содержание PG 8536

Отзывы:

Похожие инструкции для PG 8536

Бренды по названию

Популярные бренды

Miele PG 8536, Руководство по эксплуатации

Результаты поиска

Содержание PG 8536

Отзывы:

Похожие инструкции для PG 8536

Бренды по названию

Популярные бренды