Miele PG 8536 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 76

background image

This washer-disinfector complies
with all relevant local and national
safety requirements. Please note
that incorrect use can lead to
personal injury and damage to
property.
To avoid the risk of accidents and
damage to the washer-disinfector,
please read these instructions
carefully before starting to use it.
Keep these instructions in a safe
place for reference, and pass them
on to any future user.

Correct application

~

This washer-disinfector is designed

for use with the applications described
in these Operating Instructions only.
Alterations or conversions to the
machine, or using it for purposes other
than those for which it was designed,
are not permitted and could be
dangerous.
This washer-disinfector must only be
used for cleaning and disinfecting
instruments, medical devices and
laboratory equipment if the
manufacturer has stated that they are
suitable for machine reprocessing.
Manufacturer's cleaning and
maintenance instructions for
instruments etc. must also be
observed.
Miele cannot be held liable for damage
caused by improper or incorrect use or
operation of the machine.

~

This washer-disinfector is intended

for stationary, indoor use only.

Please pay attention to the following
notes to avoid injury and damage.

~

This washer-disinfector should be

commissioned and then maintained by
a Miele authorised and trained service
technician only. A Miele service
contract is recommended to ensure
compliance with GLP Guidelines and
the Medical Device Directive.
Unauthorised repairs could be
dangerous and jeopordise the personal
safety of the operator.

~

Do not install the washer-disinfector

in an area where there is any danger of
explosion or of freezing conditions.

~

The electrical safety of this

washer-disinfector can only be
guaranteed when correctly earthed. It is
most important that this basic safety
requirement is observed and regularly
tested, and where there is any doubt
the on-site wiring system should be
inspected by a qualified electrician.
The manufacturer cannot be held liable
for damage or injury caused by the lack
of or inadequacy of an effective
earthing system (e.g. electric shock).

~

A damaged or leaking

washer-disinfector could be dangerous
and compromise your safety.
Disconnect the machine from the mains
immediately and call the Miele Service
Department.

~

Personnel operating the machine

should be trained regularly. Untrained
personnel and children must not be
allowed access to the machine or its
controls.

Warning and safety instructions

5

«
...
3
4
5
6
7
...
»

Содержание PG 8536













































































Отзывы:

Нет отзывов

Похожие инструкции для PG 8536

HD 5/11 E Classic

Бренд: Kärcher Страницы: 170

NAGOLD SERENE FI02

Бренд: Hafele Страницы: 59

Бренд: Hoonved Страницы: 16

Бренд: Smeg Страницы: 39

Бренд: Philco Страницы: 128

Бренд: Famastil Страницы: 40

Бренд: Roper Страницы: 36

Бренд: Glen Dimplex Страницы: 48

Appliances Profile PFWS4605

Бренд: GE Страницы: 88

Бренд: GE Страницы: 12

Бренд: Splendide Страницы: 2

HG4585C107636RW

Бренд: Hanseatic Страницы: 82

Бренд: Gaggenau Страницы: 24

Бренд: Annovi Reverberi Страницы: 9

Бренд: Atag Страницы: 60

Бренд: Hisense Страницы: 72

Бренд: Bauknecht Страницы: 2

Бренд: Dacor Страницы: 42

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды