manualshive.com logo in svg

Miele PG 8063, Руководство по эксплуатации

Поделиться
Скачать
Miele PG 8063 Скачать руководство пользователя страница 92

Further settings

92

Factory default

All parameters which have been altered can be reset to their default
settings. Control parameters and programme settings are reset separ-
ately.

The factory settings should only be restored in consultation with
the Customer Service Department.

Open the 

Further settings

 menu by switching the machine off with

the 

 button and then switch it on again with the 

 button whilst

keeping the 

 button held in.

Open the menu as follows:

    

 

Further settings

        

 

Factory default

            

 

Reset

Reset

No

Programme settings only

-

No

Altered parameters are maintained.

-

Programme settings only

All programme settings are reset.

Programmes saved on free memory locations remain unchanged.

-

All settings

All control parameters including dispensing quantities and water
hardness will be reset.

Select an option using the 

 and 

 arrow buttons.

Confirm your selection with 

OK

.

The machine is restarted.

All settings

When 

All settings

 is selected and the machine is restarted, you will be

prompted to re-enter basic parameters such as the language, date,
time, water hardness, etc.

Enter the language, date, time etc.

When the last entry is made, all the parameters are saved and the
factory default settings have been reset. The display changes and
shows the last selected programme.

Software version

You can use this menu to call up the software versions of individual
elements, e.g. when contacting Miele Service.

For more information see “Service”.

Содержание PG 8063

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды