manualshive.com logo in svg

Miele PG 8063, Руководство по эксплуатации

Поделиться
Скачать
Miele PG 8063 Скачать руководство пользователя страница 114

Installation

*INSTALLATION*

114

Building under a continuous worktop

Removing the
lid

To build the machine under a continuous worktop the lid must be re-
moved as follows:

Unscrew both securing screws from the lid at the back of the ma-
chine.

Open the door.

Unscrew the left and right fixing screws.

Lift the lid off.

Protective foil/
Worktop pro-
tector

The protective foil supplied protects the worktop from damage
caused by steam when the door is opened. It should be positioned
underneath the worktop above the machine door.

Securing to the
worktop

To improve stability the machine must be secured to the worktop
after it has been aligned.

Open the door.

Screw the machine to the continuous worktop through the holes in
the front trim on the left and right.

Please contact the Miele Customer Service Department to secure it
at the sides to adjacent cabinetry.

Venting the circu-
lation pump

The gaps between a built-in machine and adjacent cabinetry

must not be sealed, e.g. with silicone sealant, as this could com-
promise ventilation of the circulation pump.

Содержание PG 8063

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды