manualshive.com logo in svg

Miele PG 8063, Руководство по эксплуатации

Поделиться
Скачать
Miele PG 8063 Скачать руководство пользователя страница 41

Areas of application

41

Inserting air regu-
lators

Insert the coupling of the air regulator with the opening facing
downwards in the ring holder.

For specially shaped air regulators, the ring holders must be
equipped with the APFD 202 adapters. The adapters extend the ring
holders and ensure a better grip.

The APFD 202 adapters can be purchased from Miele.

Equip the remaining positions of the insert in the same way.

Then put the small-parts baskets back in the APFD 200 insert.

Risk of injury due to compressed air.

The jet of compressed air could be dangerous for the user.
Users must be trained on how to use the on-site compressed air
system.

Supply the APFD 200 insert with pressure. For this, connect the on-
site compressed air hose at the front-right to the quick-release
coupling of the pressure chamber for the APFD 200 insert.

The compressed air must correspond to the quality of breathing air
as a minimum. For this, observe the national and regional regula-
tions.

The pressure chamber is designed for pressure ranging from
400 kPa to 600 kPa.

Provide at least 400 kPa of pressure to the pressure chamber.

Содержание PG 8063

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды