manualshive.com logo in svg

Miele PG 8063, Руководство по эксплуатации

Поделиться
Скачать
Miele PG 8063 Скачать руководство пользователя страница 31

Areas of application

31

Load carriers

The machine can be fitted with a variety of load carriers, which can
be combined with a variety of inserts depending on the type and
shape of load items.

Select accessories which are appropriate for the application.

Information on the individual areas of application can be found on the
following pages in these operating instructions.

For all areas of application defined in “Intended use”, Miele offers
suitable accessories, such as baskets and special load carriers. More
information can be obtained from Miele.

Air regulators

APFD 200

A 101

A 151

The APFD 200 insert is intended for reprocessing air regulators. The
insert can be used together with the A 101 upper basket or the A 151
lower basket. The height-adjustable A 101 upper basket must be set
to the lowest level for this; see “Adjusting the height of the upper bas-
ket”.

Содержание PG 8063

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды