Miele KS 28463 D ed/cs Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 88

background image

Warning and Safety instructions

8



The electrical safety of this appliance can only be guaranteed

when correctly earthed. It is essential that this standard safety
requirement is met. If in any doubt please have the electrical
installation tested by a qualified electrician.



Reliable and safe operation of this appliance can only be assured

if it has been connected to the mains electricity supply.



If the connection cable supplied is damaged, it must only be

replaced by an original spare part to prevent a hazard for the user.
Miele can only guarantee the safety of the appliance when genuine
Miele replacement parts are used.



Do not connect the appliance to the mains electricity supply by a

multi-socket unit or an extension lead. These do not guarantee the
required safety of the appliance (e.g. danger of overheating).



If moisture gets into electrical components or into the mains

connection cable, it could cause a short circuit. Therefore, do not
operate this refrigeration appliance in areas which are exposed to
moisture (e.g in a garage or laundry).



This appliance must not be installed and operated in mobile

installations (e.g. on a ship).



Do not use a damaged appliance. It could be dangerous. Check

the appliance for visible signs of damage.



During installation, maintenance and repair work, the appliance

must be disconnected from the mains electricity supply. It is only
completely isolated from the electricity supply when:

– the mains circuit breaker has been switched off, or

– the screw-out fuse is removed (in countries where this is

applicable), or

– it is switched off at the wall socket and the plug is withdrawn from

the socket. Do not pull the mains connection cable but the mains
plug to disconnect your appliance from the mains electricity
supply.

«
...
6
7
8
9
10
...
»

Содержание KS 28463 D ed/cs

























































































Отзывы:

Нет отзывов

Похожие инструкции для KS 28463 D ed/cs

Бренд: GE Страницы: 2

Бренд: Omcan Страницы: 32

IN TSZ 16 Series

Бренд: Indesit Страницы: 20

Бренд: Bauknecht Страницы: 18

Бренд: Maytag Страницы: 1

Бренд: Vestfrost Страницы: 32

Бренд: Thermador Страницы: 48

Бренд: FocalPoint Страницы: 5

Бренд: elvita Страницы: 116

Бренд: Marvel Страницы: 18

Бренд: U-Line Страницы: 48

Бренд: Zanussi Страницы: 12

Бренд: Zanussi Страницы: 14

Бренд: Zanussi Страницы: 19

Бренд: Zanussi Страницы: 24

Бренд: Zanussi Страницы: 24

Бренд: Zanussi Страницы: 11

Бренд: Candy Страницы: 366

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды